PRODUCT CATEGORIES
Share this page

Hydrofix plumbing connections, suitable for 70° max temperature

Immediate snap installation. A simple pressure of the hose on the fitting is enough to install it. The fitting is re-usable with replacement of the check ring. Polyamide fittings and polyethylene hoses. RINA type-tested fittings with MAC/119897/1TO/98 certificate.



CodeFoto ArticoloVarianteProduct description
17.115.0115-mm ØFemale/female sleeve
17.115.0215-mm Ø90° female/female elbow
17.115.0315-mm Ø90° female T
17.115.0415-mm Ø1/2" female/female brass joint
17.115.2615-mm Ø3/8" female/female brass joint
17.115.0515-mm Ø3/8" female/male brass joint
17.115.0615-mm Ø1/2" female/male brass joint
17.115.0715-mm Ø1/2" T brass joint for connection to accumulator tanks, boilers, etc.
17.115.2415-mm Ø1/2" female/female brass elbow
17.115.2515-mm Ø1/2" female/male brass elbow
17.115.11 * 15-mm ØBush to fit into the tube, necessari to censure seal (Ø15 = technopolymer; Ø22 = stainless steel)
17.115.15 15-mm ØStainless steel check ring, to be replaced in case the joint is re-used
17.115.16 15-mm ØSpare threaded ring nut
17.115.1715-mm ØSpare silicone O-ring
17.115.18 15-mm ØSpare plastic washer
17.115.19 15-mm Ø150-mm Ø curve with fastening screw
17.117.01 22-mm ØFemale/female sleeve
17.117.02 22-mm Ø90° female/female elbow
17.117.03 22-mm Ø90° female T
17.117.04 22-mm Ø3/4" female/female brass joint
17.117.06 22-mm Ø3/4" female/male brass joint
17.117.17 22-mm Ø1/2" T brass joint for connection to accumulator tanks, boilers, etc.
17.117.18 22-mm Ø3/4" T brass joint for connection to accumulator tanks, boilers, etc.
17.117.24 22-mm Ø3/4" female/female brass elbow
17.117.25 22-mm Ø3/4" female/male brass elbow
17.117.2922-mm Ø22x15-mm male/female reduction
17.117.3122-mm Ø22x15x22-mm reduced T
17.117.3322-mm ØMale/female manifold with two 22x15x15x22 derivations, openable at the end
17.117.3522-mm ØMale/female manifold with three22x15x15x22 derivations, openable at the end
17.117.3722-mm Ø22x22x15-mm reduced T
17.117.40 * 22-mm ØBush to fit into the tube, necessari to censure seal (Ø15 = technopolymer; Ø22 = stainless steel)
17.117.41 22-mm ØStainless steel check ring, to be replaced in case the joint is re-used
17.117.42 22-mm ØSpare threaded ring nut
17.117.43 22-mm ØSpare silicone O-ring
17.117.44 22-mm ØSpare plastic washer
17.117.45 22-mm Ø150-mm Ø curve with fastening screw
* NECESSARY for better sealing.

Aggiungi al carrello
17.115.01/17.117.01 17.115.02/17.117.02


17.115.03/17.117.03



17.115.05/06 - 17.117.06



17.115.07 - 17.117.17/18



17.115.24/17.117.24



17.115.25/17.117.25



17.115.04/26 - 17.117.04



17.117.29



17.117.31



17.117.33